|
|
| GeoCommunity Mailing List |
| |
| Mailing List Archives |
| Subject: | [gislist] Scaling ArcGIS9 |
| Date: |
04/07/2005 08:00:02 AM |
| From: |
Kidd, Art |
|
|
Hi everyone, I am back with a problem in scaling a drawing that I thought I had solved. I established two points 1000 feet apart(on the ground) and when I print it out on my HP 1055CM plotter, the points measure about 2070 feet apart when I scale it with the 1" = 1000' scale.. I know I should be able to get the entire area plotted out at 1000 scale, but I only get a portion of of it which covers the entire page.
I have not had this problem before and I am hoping that someone out there in answer land can help.
Here are my settings:
Page and Print Setup:
Size ANSI E - 34x44 in.
Orientation:: Portrait checked
Map page size Use Printer Paper Settings checked
Show Printer Margins on Layout checked
Scale Map Elements proportionally to changes in Page Size not checked
Data Frame Properties
General:
Name: Layers
Map: Feet
Display: Feet
Reference Scale 1:300
Rotation 0
Label Engine: ESRI Standard label Engine
Data Frame:
Extent Fixed Scale checked
1 inch = 1000 feet
Thanks in advance (TIA)
Art
_______________________________________________
gislist mailing list
gislist@lists.geocomm.com
http://lists.geocomm.com/mailman/listinfo/gislist
_________________________________
This list is brought to you by
The GeoCommunity
http://www.geocomm.com/
|
|
Sponsored by:
For information
regarding
advertising rates
Click Here!
|
