|
|
| GeoCommunity Mailing List |
| |
| Mailing List Archives |
| Subject: | [gislist] Software |
| Date: |
02/08/2006 01:15:02 PM |
| From: |
<stephen .. streamsidepsi.com> |
|
|
Does anyone know any Software or Application architects in the Atlanta or
Knoxville area with GIS background? Any help would be greatly
appreciated.Thx
Stephen
----- Original Message -----
From: "Solomon Pulapkura" <solomon.roy@gmail.com>
To: "Matthew Stutz" <mstutz@dordt.edu>
Cc: <gislist@lists.geocomm.com>
Sent: Wednesday, February 08, 2006 11:33 AM
Subject: Re: [gislist] Digitizing in ArcView 9.1
> Matthew,
> This could be helpful for you
>
> "To use a digitizing tablet with ArcMap, it must have WinTab-compliant
> digitizer driver software. To find out if a WinTab-compliant driver is
> available for your digitizer, see the documentation that came with the
> tablet or contact the manufacturer.
> If you installed ArcGIS before installing your digitizer, the Digitizer
tab
> may not appear in the Editing Options dialog box. To add the tab, you must
> register the digitizer.dll file.
> One way to register the DLL is to start the DOS Command prompt (usually
> accessed by clicking Start and pointing to Programs, then Accessories). In
> the Command prompt, type "cd" and a space, followed by the path to the
> directory where you installed ArcGIS. For example, to register
> digitizer.dllwhen ArcGIS is installed in the default directory, type
> "cd C:Program
> FilesArcGISBin" and press Enter. Then, type "regsvr32 digitizer.dll" and
> press the Enter key. If the registration was successful, the Editing
Options
> dialog box will have the Digitizer tab when you restart ArcMap.
> Another method of registering digitizer.dll is by double-clicking the
> esriRegSvr32.exe program in the ArcGISBin folder, then choosing to
register
> the individual digitizer.dll file."
>
> This is from ArcInfo 9.1 Help
>
> Solomon
>
> On 2/6/06, Matthew Stutz <mstutz@dordt.edu> wrote:
> >
> > Has anyone experienced this problem in ArcView 9.1? Under the
> > Editor/Options there ought to be a tab to fix settings for a digitizing
> > tablet, however I cannot locate this tab. I just loaded a driver for a
> > new tablet. Could this be the problem, or might it be ArcView itself?
> > Thanks,
> > Matt Stutz
> >
> >
> >
> > Matthew Stutz
> > Dordt College
> > Department of Environmental Studies
> > 498 Fourth Ave. NE
> > Sioux Center, IA 51250
> > 712-722-6327
> > _______________________________________________
> > gislist mailing list
> > gislist@lists.geocomm.com
> > http://lists.geocomm.com/mailman/listinfo/gislist
> >
> > _________________________________
> > This list is brought to you by
> > The GeoCommunity
> > http://www.geocomm.com/
> >
> _______________________________________________
> gislist mailing list
> gislist@lists.geocomm.com
> http://lists.geocomm.com/mailman/listinfo/gislist
>
> _________________________________
> This list is brought to you by
> The GeoCommunity
> http://www.geocomm.com/
_______________________________________________
gislist mailing list
gislist@lists.geocomm.com
http://lists.geocomm.com/mailman/listinfo/gislist
_________________________________
This list is brought to you by
The GeoCommunity
http://www.geocomm.com/
|
|
Sponsored by:
For information
regarding
advertising rates
Click Here!
|
