|
|
| GeoCommunity Mailing List |
| |
| Mailing List Archives |
| Subject: | Re: [gislist] CAD to GIS accuracy? |
| Date: |
10/31/2006 12:45:00 AM |
| From: |
Selvan |
|
|
Travis,
I don't understand, why you want to set a accuracy for migrating your CAD
data into GIS.
Anyway I just wanted to know if the CAD files that you wanted to migrate are
of the same projection/datum that you wanted to migrate, if the accuracy of
the data in maintained while capturing them, 99% of the same accuracy will
be your final GIS data. So I don't see a need to really bother about this. I
hope my answer is a bit helpful may be.
Regards,
Selvan.
----- Original Message -----
From: "Smith, Travis" <tsmith@mnsengineers.com>
To: <gislist@lists.geocomm.com>
Sent: Monday, October 30, 2006 11:41 PM
Subject: [gislist] CAD to GIS accuracy?
> Hi Listers,
>
>
>
> My past work experience has predominantly been with resource grade GIS
> data (i.e. 1 meter accuracy or worse). We are interested in migrating
> some existing CAD data into our GIS, and would like to know the
> feasibility of introducing and/or retaining survey grade accuracy (i.e.
> 6 inches or better) for this data. I would like to know if this is
> possible, and if so, what is the best method to perform this?
>
>
>
> If you have experience with this, could you please send me a note ?
>
>
>
> Thanks very much,
>
> Travis
>
>
>
>
>
>
>
>
>
> _______________________________________________
> gislist mailing list
> gislist@lists.geocomm.com
> http://lists.geocomm.com/mailman/listinfo/gislist
>
> _________________________________
> This list is brought to you by
> The GeoCommunity
> http://www.geocomm.com/
*******************************************************DISCLAIMER*************************************************************
This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you are not the intended recipient, please notify the sender by e-mail and delete the original message. Further, you are not to copy, disclose, or distribute this e-mail or its contents to any other person and any such actions are unlawful. This e-mail may contain viruses. Magnasoft has taken every reasonable precaution to minimize this risk, but is not liable for any damage you may sustain as a result of any virus in this e-mail. You should carry out your own virus checks before opening the e-mail or attachment. Magnasoft reserves the right to monitor and review the content of all messages sent to or from this e-mail address. Messages sent to or from this e-mail address may be stored on the Magnasoft e-mail system.
******************************************************************************************************************************
_______________________________________________
gislist mailing list
gislist@lists.geocomm.com
http://lists.geocomm.com/mailman/listinfo/gislist
_________________________________
This list is brought to you by
The GeoCommunity
http://www.geocomm.com/
|
|
Sponsored by:
For information
regarding
advertising rates
Click Here!
|
