|
|
| GeoCommunity Mailing List |
| |
| Mailing List Archives |
| Subject: | Re: [gislist] ESRI Image to Autodesk? |
| Date: |
01/19/2007 09:00:01 AM |
| From: |
David Lamb |
|
|
You can import a geotiff into autocad 2007 using Autocad map 3d, or map
bundled with land desktop or civil 3d. It's under map --> image -->
insert. This will bring it in the right spot. Make sure the drawing
units match the units of the image (ie, feet and feet). There is an
raster enable patch that you might have to download from
http://usa.autodesk.com/adsk/servlet/ps/dl/item?siteID=123112&id=7176069
&linkID=4199154. If you only have just base autocad, you will have to
bring in the geotif like a regular image, then use the world file to
scale and rotate the image. Also, I've had better luck using jpg's as
far as speed goes.
Hope that helps,
David
-----Original Message-----
From: gislist-bounces@lists.geocomm.com
[mailto:gislist-bounces@lists.geocomm.com] On Behalf Of Smith, Travis
Sent: Thursday, January 18, 2007 5:56 PM
To: gislist@lists.geocomm.com: agic-l@asu.edu
Subject: [gislist] ESRI Image to Autodesk?
Hi Listers,
Does anyone out there know if Autodesk 2007 can import GeoTiffs? I've
exported several GeoTiffs from ArcView 9.1, which our CAD folks have
been unable to import/read. However, they've been able to easily read
.tif/.tfw.
Does Autodesk only read .tif/.tfw format?
Is it possible to export .tif/.tfw from ArcView 9.1?
Thanks,
Travis
_______________________________________________
gislist mailing list
gislist@lists.geocomm.com
http://lists.geocomm.com/mailman/listinfo/gislist
_________________________________
This list is brought to you by
The GeoCommunity
http://www.geocomm.com/
_______________________________________________
gislist mailing list
gislist@lists.geocomm.com
http://lists.geocomm.com/mailman/listinfo/gislist
_________________________________
This list is brought to you by
The GeoCommunity
http://www.geocomm.com/
|
|
Sponsored by:
For information
regarding
advertising rates
Click Here!
|
